Shelby wheels & front bumper

Shelby USA wheels not octa 100...

Dad's work in progress! I like it!

After cleaning up the inside we add primer!

We had to weld and clean up the threads on some place's even a small dent ... but hey it's OK!

Vacuum gauge!

Little ebay luck! A vacuum gauge for the spitfire!

Small bits and pieces

Front stone plate donor part

...

Test fit

Finish brake line's

mount rear drum's

Start with cleaning parts...

Fuel line & Brake line

Handbrake cable testfit

The fuel line & brake line

Front 4 way splitter

Fuel line from front to back

Brake line's WIP

quite happy with the result so far!

RVS bolts & clean finish

extra protection

using norma claps to secure the brake & fuel line

Additional protection for the brake line, still needs some extra paint...

Brake lines

Using electricity wire to form brake pipe's

Small parts to finish the frame & brake lines

SU HS2 study

WIP on the tub. Sanding & New parts

Clutch pipe & pump
+ copper brake pipe kit single line
from James Paddock LTD

Welding wip

Welding the side supports

Side support nr 2

Finish the welds of the front left door

Undercoating

Close all the gaps with sikaflex

Apply 2 coats of undercoating for a flex protection!

Little update Turning the spitfire the easy way

The chassis is back on the rims

So we made a turning device so we can paint the tub the easy way.

Small update

I have been working on the peddels of the car.

The 2 support plate's are costing 20€ each so i decided to make them also...

Welding in the brake/clutch master plate.

Drilling small hole's for mounting the clutch & brake cilinder

So you can't buy the clutch / brake pump panel...

So i have to make it. (or at least try to :-) )

First test assembly with some left over...

The corners are way to wide

A second attempt with more made in HDPE had some better results. 2 nice stamps!